PRODUCTION AND OPERATION MANAGEMENT

PRODUCTION AND OPERATION MANAGEMENT

Bandung | 24 – 27 February 2015 | Rp 7.950.000,-/peserta
Bandung | 16  – 19 Maret 2015 | Rp 7.950.000,-/peserta
Bandung | 20  – 23 April 2015 | Rp 7.950.000,-/peserta
Bandung | 26 – 29 May 2015 | Rp 7.950.000,-/peserta

Jadwal Training 2015 Selanjutnya …

LATAR BELAKANG:

Teknologi sistem produksi dikembangkan secara sistematik yang merupakan cabang ilmu baru dalam bidang produksi. Dapat dikatakan bahwa sistem produksi pada saat ini dan di masa mendatang memegang peranan penting dalam melakukan proses produksi, karena merupakan metoda berproduksi yang akan menentukan keberhasilan dalam memenuhi tuntutan pasar industri. Dalam perkembangannya, sistem produksi banyak berkaitan dengan bidang lain seperti teknik produksi, komputasi, dan teknik pemrosesan informasi (information processing technology). Struktur dasar sistem produksi terdiri dari sub-sub sistem perencanaan produk, pemroses informasi teknik, pemroses informasi manajemen, pengendali produksi, dan proses produksi. Pemroses informasi manajemen (management information processing) meliputi pemroses informasi tentang manajemen disain produk dan manajemen produksi. Manajemen produksi (management of manufacturing system) adalah kegiatan pengelolaan produksi seperti perencanaan jumlah produk, kualitas produk, harga jual produk, maupun saat produk harus selesai dibuat, atau pembuatan rencana kerja harian. Manajemen produksi meliputi perencanaan produksi, perencanaan bahan baku, perencanaan pembebanan kerja, pengendalian kualitas, pengelolaan simpanan, pengelolaan gudang, pengelolaan peralatan bantu produksi, pengelolaan peralatan produksi, pengelolaan ongkos, pengelolaan transportasi, dan keamanan kerja. Untuk mendukung sistem produksi yang memadai diperlukan tenaga kerja yang handal atau peningkatan keahlian tenaga kerja profesi Manajemen Produksi dan Operasi (Production and Operation Management).

TUJUAN:

Membekali peserta tentang wawasan dan pegetahuan mengelola suatu sistem yang merupakan gabungan antara teknologi tentang produksi dengan elemen-elemen pemroses informasi tentang perencanaan, disain, proses pembuatan, pengendalian, manajemen, dan operasi.

SASARAN:

Setelah mengikuti pelatihan ini, peserta diharapkan mampu:

• Memahami dan menjelaskan konsep dasar sistem manufaktur
• Menjelaskan perkiraan bidang ekonomi dan dunia usaha di masa yang akan datang
• Menjelaskan perencanaan produksi, kapasitas produksi, dan pola produksi
• Menjelaskan teknik tata cara kerja dan pengaturan jadwal kerja
• Menjelaskan pengendalian persediaan
• Menjelaskan pengendalian kualitas
• Menjelaskan analisis lokasi dan tata letak pabrik.

CAKUPAN MATERI PELATIHAN:

Konsep dasar manajemen sistem manufaktur

• struktur dasar sistem produksi, klasifikasi jenis produksi, dan fungsi spesifik manajemen produksi

Peramalan

• kegunaan, peranan, dan jenis-jenis peramalan, langkah-langkah peramalan, dan pemilihan teknik dan metoda peramalan

Perencanaan produksi, kapasitas produksi, dan pola produksi

• metoda grafis dan transportasi programa linier, penentuan kapasitas yang diperlukan dan kebutuhan peralatan, pola produksi konstan, bergelombang dan moderat, analisis break even point

Teknik tata cara kerja

• ruang lingkup dan penggunaan teknik tata cara kerja, dan pengaturan jadwal kerja

Pengendalian persediaan

• pengendalian persediaan independen dan pengendalian persediaan dependen

Pengendalian kualitas

• diagram kontrol kuantitatif dan kualitatif serta sistem sampling

Analisis lokasi pabrik

• dasar-dasar pemilihan, faktor-faktor yang harus dipertimbangkan, pendekatan pemilihan dan prosedur seleksi serta metoda pemilihan lokasi

Analisis tata letak pabrik

• tujuan dan langkah-langkah pengaturan tata letak pabrik, analisis produk dan proses produksi, perhitungan jumlah mesin dan penentuan luas area, pemilihan tipe tata letak pabrik, perencanaan aliran pemindahan bahan, perencanaan area departemen dalam pabrik dan cara pengaturannya serta detail dari alternatif tata letak yang dipilih.

PESERTA:

Para praktisi tingkat operator, tingkat penyelia atau perencana bidang manajemen produksi (manajemen sistem manufaktur) pada industri rekayasa.

INSTRUCTOR :   

Ir.Sugeng Isdwiyanudi, MT.  and Team

TRAINING INSTRUCTOR

SUGENG ISDWIYANUDI, Ir. MT. And Team 

He was graduated from politeknik  universitas brawijaya malang for his diploma in mechanical engineering majoring on mechanical maintenance and repairing, from ITS Surabaya for his bachelor in mechanical engineering majoring on production engineering, and from ITB Bandung for his master program in mechanical engineering majoring on production engineering. Now he is as lecturer at mechanical engineering Politeknik Negeri Bandung(before as poltek ITB). Ir. Sugeng Isdwiyanudi, MT. has followed many trainings/courses to improve his competence. He is active instructor who often deliver training for industrial participants in Indonesia, many topics he teachs in training e.g.: pump and piping, Operation and Maintenance Boiler, Operator pressure vessel 1 (cooperated with Depnaker RI), Operation and Maintenance Centrifugal Pump, Effective Shutdown Maintenance, Reliability Centered Maintenance, Advanced Reliability Performance and Hidden Failure Supporting, Management Inventory Control, Alignment, Balancing, and Vibration, Rotating Equipment: Operation and Maintenance, Material technique, Oil Analysis, Maintenance Management (Preventive and Predictive Maintenance),Heavy Equipment Maintenance, Basic Mechanical, Strength of Material, Electro Pneumatic and Hydraulic, Rotating Equipment Alignment and Vibration, Operation and Maintenance Diesel Engine, Operation and Maintenance Boiler, Operation and Maintenance Pump and Compressor, Pressure Vessel and Tank, Preventive and Predictive Maintenance, Total Productive Maintenance (TPM), Heavy Equipment Maintenance Management, Maintenance Equipment Management for Mining, Modern Maintenance and Spare Part Management System, NDT and Quality Assurance, Integrated Material Management, Effective Production Management, Plant Life Management through Reliability Based Inspection, Maintenance Planning, Scheduling, and Coordination, Integrated Maintenance Management and Control, Implementation RCM and RBI in Industries, Total Productive Maintenance (TPM), Reliability Centered Maintenance (RCM), Operator Routine Daily Checklist and Driven Reliability, Measuring, Monitoring, and Analysis of Machinery Vibration, Vibration Prevention and Monitoring System, Advanced Application of CSI 2120/2130 and AMS Suite (RBM) for Condition Monitoring and Troubleshooting, Root Cause Failure Analysis (RCFA), NDT and Quality Assurance, Piping System.  In campus he teachs for some subjects e.g.: industrial metrology, quality control, Instrumentation and measurement, machining technique, production system and quality control, Pneumatics and hydrolics, measurement system, measuremen technique(Metrology of Geometry), mechanics vibration, management of production process, product quality control, statistics application in mechanical engineering, machining process technology, Practice of industrial metrology, pneumatics control system. In campus he has many experiences e.g.: as head of Laboratory industrial Metrology POLBAN, as head of Laboratory Metrology POLBAN, as director SPMU TPSDP POLBAN (ADB Loan 1792-INO), director assistant administration and finance SPMU TPSDP POLBAN (ADB Loan 1792-INO), head of production research group POLBAN, head of department mechanical engineering P4D, department secretary of mechanical department P4D, head of Laboratory Pneumatics and Hydrolics P4D. He invites industrial participants to share and discuss in his training class.

VENUE : 

Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING DURATION :

4 days

TRAINING TIME :

1. 24 Feb 2015-27 Feb 2015
2. 16 Mar 2015-19 Mar 2015
3. 20 Apr 2015-23 Apr 2015
4. 26 May 2015-29 May 2015
5. 16 Jun 2015-19 Jun 2015
6. 30 Jun 2015-03 Jul 2015
7. 25 Aug 2015-28 Aug 2015
8. 14 Sep 2015-17 Sep 2015
9. 06 Oct 2015-09 Oct 2015
10. 16 Nov 2015-19 Nov 2015
11. 08 Dec 2015-11 Dec 2015

INVESTATION PRICE/PERSON :

1. Rp 7.950.000/person (full fare)  or
2. Rp 7.750.000/person (early bird, payment 1 week before training)  or
3.  Rp 7.500.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS:

1. Training Module
2. Flash Disk contains training material
3. Certificate
4. Stationeries: NoteBook and Ballpoint
5. T-Shirt
6. Backpack
7. Training Photo
8. Training room with full AC facilities and multimedia
9. Lunch and twice coffeebreak everyday of training
10. Qualified instructor
11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)